Zonet ZPS1000 Manuál s instrukcemi

TABLE OF CONTENTS COPYRIGHT...

Click NEXT; the wizard will automatically discover the print server. 6. Select YES if you want to change the configuration and press NEXT to contin

11

7. Configure TCP/IP settings. If you have a DHCP server on the network, select “Obtain an IP address automatically”, or click “Specify and IP address

9. Click Next and choose the printer you want to install. You can also add a new printer in this step.

If the printer is not listed under Printer Name, click on Add New Printer and follow the below instruction. After new printer is added the printer

10. Click Next and setup program will display the summary of your printer’s configuration. 11. Now, your print server has been successfully connec

Using PSAdmin After PSAdmin is successfully installed, run the program by double-clicking the PSAdmin icon from “Network Print Server” program. The

MAC Address: The Ethernet address of the print server. Print server Name: The print server to which the device is attached. Version: The firmware ve

4 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use. 5 (Optional) In the Gate

5. Type in a Print Queue Names. Note: Each print queue corresponds to each print port of the print server. 6. Click OK. 7. Done. 8. From your Ne

OVERVIEW... 61 U

7. (Optional) In NDS Settings, Select NetWare file server(s), NetWare 4.x or later that print server can do NDS mode. 8. Click OK. From your NetWar

Subnet Mask: This option shows the print server’s current subnet mask maybe obtained from the DHCP server or manually specified. This option also lets

2. Reset allows the user to reset the print server device in order to establish a new connection or for new settings to take effect. Refresh 1. Clic

Procedure: 1. Click Start, point to Settings, and select Control Panel. 2. Double click the Add/Remove Programs icon. 3. Click Change or Remove Pr

4. Internet Printer Connection and HP Web JetAdmin IPP Overview Print server(s) support the Internet Printing Protocol (IPP). Using the appropria

6. In URL’s box, input print server’s IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** One port should be the port name as lp

9.If you want your Windows-based programs to use this printer as the default printer, please select “Yes”, and Click Next. It will appear as follow p

Installing HP Web JetAdmin Before installing the HP Web JetAdmin software, you must have domain administrator or root privileges: Download the instal

5. Configuration from Embedded Web Server Overview The Print Server contains an embedded web server that can be accessed through a supported web b

Device Name: This option allows you to view device name of the print server. To correct the print server’s device name. System Contact: This option

Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003 are registered trademarks of Microsoft Co

Manufacturer: This option allows you to view manufacturer of the printer. When the printer connected with the print server, it will be show in the

Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print ser

General Settings: Print Server Name: This option allows you to view print server’s name would be configured by PSAdmin utility. Polling Time: This

1.Click Status, it then appears the sub-menu. 2.Click AppleTalk, it then as shown in the following picture. Zone Name: If no any zone exists, the p

SNMP Communities: This option allows you to view SNMP communities from the print server. There are two communities that control message from the ne

Email Alert: This option allows the wireless to send e-mail to the administrator when the printer is ready or offline. Device Name: This option all

˙User Name: You must be input the default administration user name: admin as login user name. ˙Password: The default password is empty. After setup p

2.Select NetWare and type in the Print server that created during PCONSOLE Select the NetWare File Server to which the print server device will be att

Due to its architecture and functionality, the print server must work under NetWare 4.x/5.x NDS Bindery Emulation. When you install the NetWare file

The print server can print jobs submitted from Macintosh workstations connected to an Ethernet using AppleTalk protocol. The basic configuration is f

1. Introduction Product Overview The external print servers enhance capability by letting you place your printers, plotters, or equality printers at

Setting Up a Macintosh Computer 1. At a Macintosh computer, from the Apple menu, select Chooser. 2. The Chooser window then displays an Apple Zone

authentication purpose. The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only acc

SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access r

6. Network Print Monitor Preparation The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under MS-Windows. Please make sure that the fol

7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address automatically”, if a DHCP server is available on the LAN.

8. Done. Note: For more detailed information, please refer to your Microsoft Windows 9X/ME/NT/2000/XP manuals. Windows 95/98/Me/NT/2000/XP Instal

15. Select the Network Print Port and click OK. 16. The Add Port box will then appear, along with the print server’s Node ID (The last 6 digits

 It starts again to search for the print server on the network by using the protocol you specify in the step above. When finished, the print server w

7. TCP/IP LPR Port Printing Installation Basic TCP/IP Installation Overview When installing your print server in a TCP/IP environment, IP addresse

5. From the Printer Ports box as shown in the following picture, select the LPR Port. 6. The Add LPR compatible printers box will then appear as s

Before you start, you should prepare:  One Win9X/Me/2000/XP/2003 computer with CD-ROM  One Printer with USB port Hardware Installation

2. Run Add Printer, Click Next. 3. The Add Printer Wizard screen will appear, Select Local Printer and click Next. 4. From the type of Create a

7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for example

11. Type in a new Printer name or leave it in default, and click Next button. 12. A message reading, “To confirm that the printer is installed pro

UNIX Installation After the IP address is assigned, the Print Server is ready to be configured. For some popular UNIX systems, SCO OpenServer and Uni

b. Do you wish to change the printer description file /etc/printcap (y/n) [n] ? ---------> y c. Enter information for remote printers or local

5. Quit from tftp, and then use your editor to modify the “05 BoxIPAddress” field in the config.txt file from 0.0.0.0 to the IP address you specify

9. Select Standard Process. 10. In the Queue Name option, type in a printer name. For example: printer-1 11. In the Host Name option, type in the IP

f. Click New button. g. Click Forward button. 57

h. In the Name field, type a user-defined name, click Forward. i. In the Queue Type field, choose Networked UNIX. j. In the Server field, type

m. In the Printer field, choose Postscript Printer. n. Choose the model of printer and click Forward. o. Done.

2. Print Server Installation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments

UnixWare 7 1. Login root. 2. Run CDE (Common Desktop Environment). 3. Open the subpanel under the SCO icon in the Front Panel. 4. Select SCO Adm

8. Upgrading Print Server Overview Upgrading print server will allow you to replace its firmware inside the print server while the newer software vers

5. Done! Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working direc

4. Click Upgrade form Browser and select the firmware file. 5. Click Upgrade. 6. Done.

9. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in thi

USB Port Related Problems Printing data failure may be caused by a loose connection of the print server to the USB port of the printer. Check to see i

11. Repeat the Steps 8-12 for the other Ethernet adapter. 12. Restart the computer. 13. Done. Moving the print server to A New Segment If the print

9. Done! Moving Your Computer to A New Segment If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me compu

B. The print server's IP address is duplicated or is as same as another computer's IP address on the network. If this

6. In your editor, modify "BoxIPAddress" field from "0.0.0.0" to "192.72.214.100". Leave other options as default and d

NetWare 3.12, 4.x, 5.x HP Web JetAdmin Windows NT/2000/XP/2003 NetWare 3.12, 4.x, 5.x Remote management of print server, include alert and consumabl

Appendix: Load Default Value You can load the default value of print server by press the reset button. Please press 5 to 10 seconds until the stat

Frequently Asked Questions Question A Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanatio

Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The prin

73 Additional Installation Instructions Panasonic KX-P610

The PSAdmin is a proprietary Windows based management program that can assist you in configuring and managing your print server in NetWare environme

9